20 Millions Shots 808nm Diode Laser Hair Removal Machine

20 Millions Shots Warranty 808nm Diode Laser Hair Removal Beauty Machine

1. Introduction:
 
  Diode laser hair removal machine is a laser that produces a larger beam of highly concentrated light. The laser beam is well absorbed by the pigment located in the hair follicles. During the procedure, the laser pulses for a fraction of a second, allowing the hair to absorb the energy and heat up. As it heats up, the hair shaft and bulb are damaged which significantly impedes its ability to re-grow. And with the large spot size, the process treats numerous hair follicles simultaneously, making the treatment much faster than traditional IPL and other hair removal alternatives.
 

2. Function:

Permanent Hair Removal

3. Treatment Theory:

  808nm diode laser epilation machine is the golden standard for laser hair removal. The melanin in the hair follicle largest absorb the 808nm diode laser. While the water and hemoglobin in the skin will not absorb the 808nm diode laser wavelength. 808nm diode laser machine treatment is safe and painless. Compared to IPL machine or other method, 808nm wavelength diode ICE laser machine is the best.
 

4. Features:

A) Spot size & head design
  Intuitively the smaller the treatment head the more shots you need to fire to cover the same area (more shots means more cost) Consequently the smaller the head, the more likely it is that you will miss areas and the treatment will therefore be less effective. The converse is also true.

  The delivery of light across the entire treatment area (especially over larger areas such as the back) is more uniform and less likely to create uneven results when using the larger treatment head. The added advantage of larger treatment heads is that their depth of penetration can be greater than that of smaller sizes.
In this case, the spot size of SKEILY diode laser is 12*20 mm²(600w) and 15*26mm²(1200w), which is the highest configuration among all the diode laser hair removal machines.
Power

B) High Output Power
  A large spot size on an underpowered machine can result in the light energy being dissipated over the large spot size resulting in ineffective treatments. If you do want a larger spot size for the reasons discussed make sure the machine you are looking at has the power to handle the larger spot size.

  In the case of SKEILY diode laser, its total power is 600watts (or 1200 Watts). There are 6 (or 12) laser bars in the head and the power of each is 100 Watts. As a result, it can easily handle the 12*20 mm²(or 15*26mm²) spot size with no doubt.

C) Integrated Cooling
  For a diode laser hair removal machine, the ability to cool the skin during hair reduction therapy is critical to minimizing the potential for pain, redness, burns and hyper/hypo-pigmentation. That is because the deeper the target tissue the more time it takes the heat to dissipate. As a result, if insufficient time is allowed for the heat to dissipate between shots you can very easily build up temperature with each successive shot. So much so that the laser beam that would normally not cause any adverse effects now becomes the straw that breaks the camels back. Hence the ability to cool the skin rapidly dissipates this latent heat and minimizes the chances of adverse effects due to overheating.

  It also effectively dissipates the heat which in turn allows you to use higher fluences (power levels) delivered at a higher repetition rate (speed) while still maintaining comfort for the patient. The net result is more effective treatment requiring fewer visits to achieve the desired result.

  By far the most effective system for cooling is Integrated Contact Cooling (ICC). While there are several ways of producing ICC it is essential that your laser machine has such a system. Any other method (such as air or chilled gel) is simply not effective.

  In the case of SKEILY diode laser hair removal machine, it has two Thermal Electric Cooling Module in the head. It’s able cool the head to -5 degrees during the whole treatment, no matter how fast and how many you shoot.

D) Ease of Operation
  Look at the machine that you are purchasing to see if the operating interface is easy to use. There are several different systems across different machines some of which are better than others. In some cases you have to input treatment parameters from tables and this can be cumbersome and make it possible for you, or your staff, to make mistakes resulting in bad clinical outcomes.

  SKEILY 808nm diode laser hair removal equipment has a simple and professional user interface. It has a simple programming which is suitable for all operators where they simply have to enter which area they treatment and the skin type of the paitient. This laser hair removal system will set up the machine for treatment. You start with the default safe value and trying more effective parameters by keeping asking your patients how they feel. When found, you can simply save it and it will be even easier next time.

5. Parameters:

6. ROI Example: